PRODUCT DESCRIPTION
AMSOIL Synthetic Manual Transmission and Transaxle Gear
Lube (MTG) is a premium blend of the finest synthetic base
oils and advanced, high-performance additives. It is
formulated specifically for maximum protection in the most
demanding manual transmission and transaxle applications
where an extreme pressure GL-4 gear lube is specified,
including those where high horsepower/high torque engines
and towing or heavy loads increase transmission
stress.
AMSOIL MTG prevents the thinning effects
of mechanical shear. It maintains its viscosity and
superior film strength for consistent, long-lasting wear
protection. MTG excels in hot and cold temperature extremes
that exceed the limits of conventional mineral oils. It
protects against rust, keeps seals soft for long life, and
is compatible with brass synchros for smooth synchromesh
shift quality.
Ideal for NV-4500
Transmissions
MTG is a thermally stable, extreme pressure formulation
that resists heat, oxidation, acid build-up and varnish. It
is the ideal gear lube for high temperature applications,
including the New Venture NV-4500 transmission, which
retains heat due to its cast iron housing and is often
subjected to heavy loads and high torque from turbo-diesel
engines.
AMSOIL MTG is the replacement fluid for
GM part #12346190 and Chrysler part #4874459 (Chrysler
specification #MS-9070).
Ideal for Muscle Car
Transmissions
The extreme pressure design of MTG reduces friction, heat
and wear. It withstands the high horsepower and quick
shifts common to muscle cars equipped with
large-displacement engines.
Ideal for Front Wheel Drive
Transaxles
The advanced synthetic formulation provides ultimate
protection for gears and bearings in front wheel drive
transaxles.
Excellent for Service
Centers
MTG is a versatile transmission and transaxle lubricant. It
reduces inventory needs, is readily available and is cost
effective compared to vehicle OEM-branded
products.
Performance Features
• Reduces friction, heat and wear
• Superior high temperature stability
• Resists heat, oxidation, acid build-up and
varnish
• Lasts two times longer than conventional petroleum
oils
• Improves cold weather shifting
Applications
Recommended for synchronized manual transmissions and
transaxles that require 75W-85, 75W-90 or 80W-90
viscosities and any of the following performance
specifications: API GL-4 and MT-1, ZF TE-ML 02B, 16A, 17A
and 19A, Chrysler MS-9070, MAN 341 ML. Recommended for use
in NV 4500 transmissions, and replaces GM part #12346190
and Chrysler part #4874459.
Meets GL-4 performance specifications
required by some models of Acura, Hyundai, Infiniti, Kia,
Land Rover, Lexus, Mazda, Mitsubishi, Nissan, Subaru,
Suzuki, Toyota, Volkswagen, Hino Mitsubishi-Fuso, and
Zetor. Ideal for muscle car transmissions such as Muncie,
Borg Warner, Saginaw, Ford Toploader, Dearborn and New
Process. Also recommended for Gear Vendors Gear
Splitters.
Service Life
Under normal operating conditions AMSOIL MTG will last two
times longer than conventional petroleum GL-4 gear oils.
Where the original equipment manufacturer (OEM) recommends
synthetic oils, follow the OEM drain interval (such as NV
4500).
|
TYPICAL TECHNICAL
PROPERTIES
|
|
Synthetic Manual Transmission
and
Transaxle Gear Lube 75W-90 API
GL-4
(MTG)
|
| Kinematic
Viscosity @ 100°C, cSt (ASTM D-445) |
14.7
|
| Kinematic
Viscosity @ 40°C, cst (ASTM D-445) |
84.5
|
| Viscosity Index
(ASTM D-2270) |
181
|
| Flash Point, °C
(°F) (ASTM D-92) 150°C Min. |
204 (399)
|
| Pour Point, °C
(°F) (ASTM D-97) |
-46 (-51)
|
| 4-Ball Wear
75°C, 1200 rpm, 40kg, 1 hr. |
0.45mm
|
| Brookfield
Viscosity @ -40°C |
44,200
|
| Foam Stability
(ASTM D-892) (20/50/20) |
0/0/0
|
| Copper Corrosion
(3 hr, 121°C) (ASTM D-130) |
1B
|
This content block is currently not available. Please contact RSS feeds service support team.
This content block is currently not available. Please contact RSS feeds service support team.
